How To Choose Flooring, Walls, Ceilings, and Doors For Facility Food Safety

dmitri-popov-236060-unsplash

When it comes to food safety, materials matter.

By Joseph Bove, PE, Stellar, Vice President, Business Development

This post was originally published on Food For Thought


Whether you’re designing a new food and beverage facility (like a coffee roasting plant) or renovating an existing one, it’s important to consider the materials you choose for to surround your processing — literally.

When it comes to food safety, these features sometimes get less attention than other factors — such as equipment, ingredient storage/segregation and product handling — but they can be a plant’s Achilles heel if ignored.

Here, we’re going to look at the best practices when selecting materials for your facility’s flooring, walls, ceilings, and doors.

pierre-chatel-innocenti-648693-unsplash.jpg

FLOORING

When it comes to selecting a flooring system for your facility, I recommend a fluid-applied flooring — either epoxy or polyurethane.

Of course, the exact type of flooring that is best for your facility ultimately depends on the type of product you’re manufacturing and what chemicals and temperatures will be hitting the floor during cleaning.

Many would argue that the best flooring option is dairy brick with epoxy grout, which is extremely durable. This is a great flooring option for food manufacturers, but the downside is that it’s very expensive.

Another big consideration for your flooring is drain location:

You want to have enough properly placed drains so that you don’t have to push water very far before getting rid of it.

Plus, floors that don’t drain properly can create standing water and excess moisture, which can lead to mold growth.

We don’t usually recommend trench drains or slot drains because they can increase the risk of bacterial harborage. Instead, I typically opt for stainless steel drains because they’re non-corrosive (compared to regular steel) and can withstand high-temperature water used in sanitation.

bernard-hermant-638298-unsplash.jpg

WALLS & CEILINGS

At Stellar, we utilize some type of metal panel system for all of the walls and ceilings we design and construct for clients. Typically, we use insulated metal panels (IMP), because they are quick to install, cost-efficient and cleanup-friendly.

IMPs are a great choice for ensuring food safety, and they last a long time. IMPs are made for durability, so they can withstand getting hit by high-pressure hose reels, hot water and chemical cleaners. For plants that have a nightly sanitation cycle, these panels can last for 15 years with minimal maintenance (i.e., only re-caulking the panel joints every seven years).

You typically want to avoid any porous materials in a food and beverage plant. For example, concrete is porous, which means bacteria can grow in those hard-to-clean pockets. If your plant has an existing concrete wall, you could paint it with epoxy or urethane, but it’s not ideal.

Bottom line: If you’re building new, IMP is the way to go.

bernard-hermant-603661-unsplash (1)

DOORS

Your facility’s doors are critical to food safety because they can present a major, ongoing risk for contamination.

Interior facility doors should be in proper operating condition and have proper air seals on all four sides.

With exterior doors, it’s important to continually maintain the rubber sweeps at the bottom.

A good way to test the seal at the bottom of your doors is to try to fit a piece of paper under the door or shine a flashlight at it. If you can slip a sheet of paper through or if you can see the light from the other side, that’s a red flag.

Exterior doors may need attention every year, and that rubber sweep may need to be replaced or adjusted multiple times per year.

Read the original post on Food For Thought

 

Joseph Bove, PE, has more than 28 years of experience in the design, engineering and construction of food processing plants. Joe develops architectural and engineering standards to ensure compliance with client procedures, government codes and standards. 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s